5 in 1 Deep Tissue Laser Therapy Machine

Why Invest in a 5-in-1 Laser System?

• One System, More Service Possibilities

Instead of purchasing and maintaining several separate devices, this multifunctional platform brings five laser applications and cooling support into one compact system. It helps professional practices make better use of treatment-room space while expanding the range of services they can offer.

• Designed for Efficient Daily Operation

The touchscreen interface, interchangeable treatment tips, foot switch and adjustable treatment parameters make it easy to move between different applications without complicated equipment changes.

• Compact Enough for Flexible Use

With a net weight of approximately 5 kg, universal 100–240V input and a protective flight case, the system can fit into both fixed treatment rooms and more flexible professional working environments.

5 Laser Applications + Integrated Cooling Support

Powered by 980nm diode laser technology, the system combines adjustable spot sizes, pulse and continuous operating modes, and interchangeable treatment tips to support multiple professional applications from a single platform.

Function 1 — Vascular Application

The precision treatment tip and small adjustable spot sizes allow practitioners to deliver focused 980nm laser energy to targeted areas with greater control.

Spot sizes from 0.2mm to 3.0mm provide flexibility when working with treatment areas of different sizes, while adjustable power, pulse width and frequency allow parameters to be tailored to professional treatment protocols.

Function 2 — Nail Care

A dedicated treatment tip supports professional laser nail-care applications. The 980nm wavelength delivers concentrated energy through the nail area while adjustable operating parameters give practitioners greater control over treatment settings.

This dedicated mode allows nail-care services to be incorporated into the same multifunctional platform without requiring an additional standalone laser system.

Function 3 — Deep Tissue & Physiotherapy Support

The 980nm wavelength is designed for deeper photothermal applications and can be incorporated into professional physiotherapy and rehabilitation workflows.

Practitioners can adjust power, pulse width and frequency according to the treatment protocol and target area, while the dedicated physiotherapy tip supports controlled delivery over larger treatment areas.

Function 4 — Skin Care & Rejuvenation

The system also supports professional skin-care applications using controlled 980nm laser energy.

Adjustable treatment parameters and multiple spot sizes give practitioners flexibility when working with different areas, allowing the device to complement a broader aesthetic and wellness service menu.

Function 5 — Targeted Skin Care

A dedicated operating mode provides additional flexibility for professional targeted skin-care applications. Adjustable laser parameters allow practitioners to select appropriate settings according to their training, treatment protocol and client needs.

This expands the range of services that can be performed with the same compact laser platform.

Additional Function — Integrated Cooling Handpiece

The dedicated cooling handpiece provides convenient localized cooling as part of the treatment workflow. It can be operated independently after the system is powered on, eliminating the need for a separate cooling device.

Cooling support can be incorporated before or after compatible procedures according to the practitioner’s treatment protocol and client requirements.

More Services Without the Cost of Multiple Machines

Designed as a cost-effective solution for growing businesses, this multifunctional system allows you to expand your service menu without purchasing a separate machine for every application. Fewer devices mean lower upfront equipment investment, less space occupied and a simpler workflow—making it a practical choice for clinics, spas and treatment centers looking for greater value from every purchase.

5 Interchangeable Treatment Tips

One fiber-optic handpiece supports five interchangeable treatment tips for different applications. Simply remove the current tip and install the one required for the selected treatment mode. The quick-change design keeps operation straightforward while allowing one laser platform to support a wider range of professional services.

Intuitive 8” Touchscreen Operation

The 8-inch touchscreen keeps everyday operation simple and organized. Select the application directly from the home screen, then adjust power, pulse width, frequency and aiming light settings from the dedicated treatment interface. Clear visual controls help reduce unnecessary setup steps and make switching between services more efficient.

Built for Professional Treatment Environments

Compact construction, integrated air cooling and a streamlined operating workflow make the system practical for regular use in clinics, wellness centers and aesthetic practices. Its 5 kg design also makes it easier to reposition between treatment rooms or transport when required.

Adjustable Power, Pulse and Frequency Control

Different treatment conditions and clients require varying treatment intensities. This system enables precise parameter adjustment to match specific rehabilitation needs.

• Power: 0.5–30W
• Pulse Width: 5–100ms (mode-dependent)
• Frequency: 1–20Hz (mode-dependent)

Integrated Ice Compress Hammer

More than a laser system, the machine also includes a dedicated ice compress hammer for convenient cooling support. It can be used independently after the machine is powered on, allowing cooling care to be incorporated into the treatment workflow without requiring an additional standalone cooling device.

5 Focus Rings for Precise Spot Size Selection

Five interchangeable focus rings provide 0.2mm, 0.5mm, 1.0mm, 2.0mm and 3.0mm spot sizes, giving practitioners greater control when working with treatment areas of different sizes. Simply select the appropriate focus ring according to the intended application.

Who Is This Machine For?

Physiotherapy & Rehabilitation Clinics
Add a compact 980nm laser platform to complement existing physical therapy and rehabilitation services.

Aesthetic & Wellness Centers
Expand your service menu with multiple applications without filling treatment rooms with several separate devices.

Multi-Service Practices
A practical choice for businesses looking for one flexible platform that can support different professional treatment workflows.

Professionals Who Need Portability
The compact 5 kg unit, universal voltage compatibility and protective flight case make transportation and flexible room-to-room use easier.

Product Display

What’s Included

• 5-in-1 Laser Therapy Machine
• 5 Interchangeable Treatment Tips
• Ice Compress Handpiece
• Foot Switch
• Protective Laser Eyewear
• Power Cable
• User Manual

How to Use?

Screen Function Introduction

In the interface:

(1) “Pulse mode” is default. Click button to switch to continuous mode; only power adjustable in continuous mode.
(2) “Aiming lamp”: 3 levels of brightness, adjustable cyclically.
(3) “Power”: Adjustable range: 0.5–30W.
(4) “Pulse width”: Vascular removal:15–100ms; Nail fungus/Physiotherapy/Eczema herpes:15–50ms; Skin rejuvenation:5–30ms.
(5) “Frequency”: Vascular removal:1–5Hz; Physiotherapy:1–9Hz; Nail fungus:1–6Hz; Skin rejuvenation:1–20Hz; Eczema herpes:1–10Hz.
(6) “Current times”: Laser counts after boot, auto cleared when powered off.
(7) “Total times”: Cumulative total laser shots; long press display area to reset.
(8) All parameters only editable under pause status; locked after tapping Start.
(9) Tap “Start”, step foot switch to emit laser. Tap “Pause” to stop working.

Pre-operation reminder:

Remove fiber handpiece protector before power on. Do not look directly at handpiece; laser glasses must be worn. Switch function pages and return home page only under pause state.

The default is vascular removal plug on the hand piece, When installing and replacing the required plug, unscrew the vascular removal plug and replace it with the corresponding physiotherapy plug, Then tighten it.

Basic Troubleshooting & Maintenance

For reliable daily operation, follow the user manual and basic maintenance guidelines. If you experience a minor operating issue, the following quick checks may help.

Touchscreen or System Not Responding
Avoid tapping touchscreen controls too quickly or repeatedly. If the system becomes unresponsive, restart the machine. If the calibration screen appears, follow the on-screen calibration prompts before returning to normal operation.

Over-Temperature Protection
The system features built-in over-temperature protection. If the machine becomes too hot, laser output may temporarily stop. Leave the unit powered on in standby mode so the internal fans can dissipate heat, and resume operation after the machine returns to normal temperature.

Checking Laser Output
If you need to verify laser output, follow the test procedure provided in the user manual. Since the 980nm laser is invisible to the naked eye, never look directly into the treatment head or laser output.

Fiber & Treatment Head Care
Handle the optical fiber carefully and avoid excessive bending, pulling or pressure. Clean the treatment head after use and replace the protective cover to help prevent dust and contamination.